Mega Mega ZX12 DSII Legal Race

High performance at realistic prices, Mega engines are made for Serpent by Picco Micromotori in Italy. The new Mega ZX12 DSII features some new performance and durability enhancements to create a better overall engine for in your 200mm chassis.

Crankcase
This grey anodized crankcase has been forged from high grade aluminum and is therefore very strong and highly durable. The design incorporates many cooling fins to keep the temperature under control whilst the internal porting ensures optimized gas flow.
To ensure a perfect seal, when the carburretor is mounted, the opening for the carb has been fitted with a rubber o-ring whilst to enable the smoothest possible movement of the crankshaft the casing has been fitted with Swiss-made high quality bearings. For looks, the side of the crankcase sports the new Mega Symbol on the front side and the ZX12 logo on the rear side.

Cooling Head
This beautiful Orange anodized cooling head features 7 cooling fins for regulating the temperature of your engine. The head has been machined around the edges to allow access to the engine mount screws as well as to make it look nicer. On top of the cooling head is the Mega Symbol, ZX12 logo, DSII logo and the engine categorization symbols, all laser etched.
Low type head for lower center of gravity.

Combustion Chamber
Made from the finest quality alloy this combustion chamber is precision made to ensure a perfect seal even under extreme temperatures. Mega 6 Glow plug is supplied to aid running in (When racing we recommend Mega 7 Cold #200171).

Crankshaft
Made from high strength steel the crankshaft is finished to the highest standard. It has a large bore intake which is optimized to best accommodate the fuel flow as well as a turbo scoop on the black anodized bell crank that forces the fuel into the combustion chamber. The entire crankshaft has been made using a harder, more wear resistant, material which increases the durability of not just this part, but the entire engine.

Carburettor
This easy to adjust 2 needle carburettor maintains its needle settings, regardless of temperature, thanks to its design and the materials used in its construction.

Piston & Conrod
This super lightweight piston has been machined from high grade aluminum and features 2 rings around its circumference for aiding lubrication. The piston has been made using true ABC (aluminum piston, brass sleeve with chrome plating) construction for ultra long usage with little or no visible wear.
The new conrod has been made of a different material than that of previous versions and the latest design sees more material around the big end, which provides more strength for this area. Another improvement is that the piston pin is now hollow which means a considerable reduction in oscillating mass.

Sleeve
This 3 port high-density hard-chromed sleeve, offers incredible durability coupled with highly effective porting ensure that maximum revs are achieved as well as producing a wide power band.

Back Plate
The crankcase back plate is cast and features a 0-ring groove and 2 aerodynamic lugs for improved mixture flows and lubrication.

Packaging
Comes in a newly designed Mega box along with instruction manual, reference sheet, and decal sheets.