Your shopping cart is currently empty. Please continue shopping.
Tekno RC Machined Differential Pinion Gear (14T) (use with TKR9151C)
TKR9153C
Tekno RC Differential Pinion (14T). Use with TKR9151C, Differential Ring Gear (47T).
These new gears have an improved
tooth engagement which offers smoother acceleration and lower rolling
resistance for improved corner speed. These new ring and pinion gears
are a direct replacement for TKR9151 and TKR9153 and no additional
hardware is required.
Overdrive
In very loose conditions, these new gears can be used for under/over
drive. Overdrive is only recommended in rare situations where traction
is very low.
OD with 13/43 and 14/47 = 1.484% (13/43 goes in front)
OD with 13/43 and 12/40 = 0.7724% (13/43 goes in front)
OD with 12/40 and 14/47 = 0.7116% (12/40 goes in front)
| Current 2.x | 12t Pinion (TKR9153) 40t Ring (TKR9151) FDR: 12.3077 |
Included with EB/NB48 2.x. Most punch but more rolling resistance off power. Good for smaller tracks with more 180’s. Also good for tracks with short run ups to jumps out of corners. |
| New | 13t Pinion (TKR9153B) 43t Ring (TKR9151B) FDR: 12.2130 |
Reduced wheelspin on loose tracks. Less punch but smoother than 12/40 gears. Best balance. Recommended for larger/high speed tracks with more sweepers. |
| New | 14t Pinion (TKR9153C) 47t Ring (TKR9151C) FDR: 12.3956 |
Smoothest acceleration, least rolling resistance, improved corner speed for sweeping corners. Nearly a direct replacement for 12/40 gears but with improved tooth engagement. |
Fits:
Tekno RC NB48 2.0
Tekno RC EB48 2.0
Tekno RC NB48 2.1
Tekno RC EB48 2.1
Tekno RC NB48 2.2
Tekno RC EB48 2.2
Tekno RC NB48 2.0
Tekno RC EB48 2.0
Tekno RC NB48 2.1
Tekno RC EB48 2.1
Tekno RC NB48 2.2
Tekno RC EB48 2.2